Diesel Service Tools

A set of 14 diesel injector seat cutters and one injector base cleaner designed to ensure that the injector bore area is clean and faced to the dimensions required when replacing or reconditioning the diesel injectors, avoiding blow back and poor emissions. Supplied with a T-bar driver with 19mm Hex socket. 19mm injector base cutter, seat cutters include: 14mm flat, 15.5mm flat, 15.5mm angled, 17×17.5mm, 17×19.5mm, 17x20mm, 17.5×20.5mm angled, 17mm angled, 17mm flat, 15x19mm flat,17x19mm flat, 17x21mm angled, 18x21mm flat, 20x21mm flat.

Price guide: £209.00

Click on image for more information and to check current pricing.

The Laser 8288 injector puller set has been designed to pull the Ford EcoBlue diesel injector in one piece. Previously the EcoBlue injectors could only be removed if the fuel return connection and piezo head were removed by breaking them off, rendering the injector unusable. This kit allows these injectors to be pulled out without needing to break the injector first. Note: if the injectors are badly seized and will not pull out, then please see Laser part no. 7912.

Price guide: £349.00

Click on image for more information and to check current pricing.

The BMW N47 (2.0L) and N57 (3.0L) diesel engines are equipped with a high pressure Bosch fuel rail just like any other common rail diesel engine, but they use M15 threads where the injection pipes fit the rail rather than the traditional M12 and M14 connectors. This makes isolating individual fuel lines when running injector and rail pressure diagnostics a challenge. This new M15 injection fuel rail blanking & sealing plug set provides the necessary and correctly-sized metal blanking plugs that allow the technician to blank off and seal individual injector circuits when performing pressure diagnostic tests.

Price guide: £129.00

Click on image for more information and to check current pricing.

The M9R 2.0L diesel engine, as used by Nissan, Renault and Vauxhall, has deep seated injectors that are often difficult to remove. The Laser 8504 works in the same way as the original manufacturers tool using a small but robust threaded puller design. The kit includes 2 force screws with different threads, allowing the kit to work with both the piezo and solenoid style injectors used on these engines. Note: these injectors can be very tight and therefore require significant lubrication with a release agent to get them to move. Where possible run the engine up to temperature before attempting removal of injectors.

Price guide: £119.00

Click on image for more information and to check current pricing.

The Laser 6249 offers professional alignment alongside checking and adjustment of the O ring. For use with Volkswagon Phaeton and Touareg from 2003, T5 from 2004, Audi A3 from 2004, this tool includes the P/D Injector alignment and injector seal fitting tools and comes complete in a robust blow mould case. Application: Volkswagon Phaeton and Touareg from 2003, T5 from 2004, Audi A3 from 2004. (4 Cylinder 4 valve per cylinder engines, 5-cylinder and 10-cylinder diesel engines)

Price guide: £37.98

Click on image for more information and to check current pricing.

A wrench set designed specifically for the safe and non-damaging removal of the fuel filter, drain and water sensor from the Mazda Skyactiv-D 2.2L diesel engines.

Price guide: £29.98

Click on image for more information and to check current pricing.

The Laser 6256 is an essential kit for CR Diesel Injector repair and this set includes the tools to loosen and remove an injector’s internal fixings. Manufactured from Chrome Vanadium and S45C, this set includes the following: Injector ball valve lapping tools and guide 3 x Injector ball valve lapping tools 10mm Hex x 7.6mm, Denso CR Injector valve seat removal tool 8 sided socket for Bosch CR Injectors Internal fixing removal tool for Siemens CR injector

Price guide: £70.00

Click on image for more information and to check current pricing.

The Laser 6714 is a diesel injector extractor for 2.7L V6 & 3.6L V8 CR engines fitted to Land Rover, Range Rover and Jaguar. This mechanical extractor removes the injector in one piece for added convenience, and is compatible with the following car models: Land Rover 3.6L TDV8, 2.7L TDV6 diesel engines found in Land Rover Discovery 3, Discovery 4, New Range Rover, Range Rover Sport and Jaguar X200 S-type, X250 XF. X350 XJ

Price guide: £73.98

Click on image for more information and to check current pricing.

Specifically designed for removing Delphi/Bosch diesel injectors using a Slide Hammer with 5/8" UNF thread. Please see the Product Manual for full details. Download Product Manual  

Price guide: £84.98

Click on image for more information and to check current pricing.