Diesel Service Tools

The Laser 6256 is an essential kit for CR Diesel Injector repair and this set includes the tools to loosen and remove an injector’s internal fixings. Manufactured from Chrome Vanadium and S45C, this set includes the following: Injector ball valve lapping tools and guide 3 x Injector ball valve lapping tools 10mm Hex x 7.6mm, Denso CR Injector valve seat removal tool 8 sided socket for Bosch CR Injectors Internal fixing removal tool for Siemens CR injector

Price guide: £70.00

Click on image for more information and to check current pricing.

The Laser 6714 is a diesel injector extractor for 2.7L V6 & 3.6L V8 CR engines fitted to Land Rover, Range Rover and Jaguar. This mechanical extractor removes the injector in one piece for added convenience, and is compatible with the following car models: Land Rover 3.6L TDV8, 2.7L TDV6 diesel engines found in Land Rover Discovery 3, Discovery 4, New Range Rover, Range Rover Sport and Jaguar X200 S-type, X250 XF. X350 XJ

Price guide: £73.98

Click on image for more information and to check current pricing.

The 6092 is an air hammer extractor adaptor for the removal of diesel injectors/bushes and allows effective transmission of impact force and vibration to any adaptor with a 5/8″ thread. For diesel injector extraction use this model with with: 4760 Delphi/Bosch CR kit, 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 and 6123 off-line adaptor. This tool uses the power of the air hammer to withdraw and extract seized and stuck components such as diesel injectors, pivot pins and small diameter bearings. Once the extractor is screwed on to the injector, and the air hammer connected, the powerful impact and vibration will help extract the most stubborn components. Completing this tool is a robust design and reliable manufacture in Sheffield.

Price guide: £139.00

Click on image for more information and to check current pricing.

Designed to work with all laser 5/8” diesel injector adaptors the laser 8727 mounts in-line with the component to be pulled allowing a more effective transmission of impact force and vibration to any adaptor with a 5/8″; unf or m18 thread. The reduction in total working length also helps increase the applications when used with the engine in the vehicle. For increased impact & vibration transfer over traditional gun style impact hammers. Pneumatic hammer pull function. Impacts pull instead of push.

Price guide: £209.00

Click on image for more information and to check current pricing.

This 4 pc 1/2" drive diesel injector nozzle socket set is primarily introduced for Siemens and Bosch injectors

Price guide: £62.99

Click on image for more information and to check current pricing.

Professional air hammer with variable speed trigger, built in power regulator and quick change chuck. This model can provide 2200 blows per minute (bpm)with an air hose size of 3/8″ ID and a air inlet size 1/4 BSP providing an average air consumption 4.0cfm. This diesel injector extractor allows effective transmission of impact force and vibration to any adaptor with a 5/8″ thread. This set includes 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12 Delphi, M16 Denso, Bosch Dual Connector and a valve seat removal tool for Denso, and off-line injector for access and a Bosch injector dismantling tool.

Price guide: £559.00

Click on image for more information and to check current pricing.

The off-Line adaptor has been designed to allow the use of the Laser 6092 Air Hammer Extractor in situations where inline access is not possible. This model has been equipped with 5/8″ UNF internal thread to fit the 6092 (MM code: 000326092) and is also equipped with a male thread to fit (4760, 6118, 6119, 6120, 6121, 6122). This unit allows up to 30 degrees of angle to be applied for difficult access, and is completed with a reliable manufacture in Sheffield for additional quality.

Price guide: £61.98

Click on image for more information and to check current pricing.

The Laser 6264 is designed to be used with an air hammer and is designed to remove most diesel injectors. This diesel injector extractor allows effective transmission of impact force and vibration to any adaptor with a 5/8″ thread and includes 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12, Delphi, M16 Denso, Bosch Dual Connection. This unit also comes with a plus valve seat removal tool for denso and off-line injector adaptor for access and a Bosch injector dismantling tool.

Price guide: £379.00

Click on image for more information and to check current pricing.